ISO3923-1 Metallic Powders Funnel Method Apparent Density Apparatus

Interest to Device (1 unit) for determining bulk density using the Hall funnel method – must comply with PN-EN ISO 3923-1 and also be equipped with a Gustavsson funnel, Carney funnel, and additional accessories necessary to perform tests in accordance with the above standard.
– Device (1 unit) for determining bulk density using the Scott volumeter method – must comply with PN ISO 3923-2, USP 616; ASTM B329; Ph.Eur. 2.9.34 and be equipped with additional accessories necessary to perform tests in accordance with the above standards.
– Device (1 piece) for determining bulk density with sedimentation must comply with the PN-EN ISO 3953 standard and be additionally equipped with accessories enabling tests to be performed in accordance with the above standard, in particular 100 ml and 125 ml measuring cylinders. The device must also be equipped with at least one compatible 25 ml measuring cylinder.
– A density standard in the form of powder (in an amount of at least 200 g) with a known bulk density and bulk density with settlement, with the possibility of performing tests on it in accordance with the following standards: PN-EN ISO 3923-1, PN ISO 3923-2, PN-EN ISO 3953.

Thanks for prices and conditions.

Where can I purchase this type of funnel? I require a Standard flow meter funnel with a 2.5 mm diameter calibrated orifice. I am located in Canada.
I look forward to hearing from you.
Thanks,
Janna