home > Equipments > Bulk Density Apparatus > LABULK 321 Abrasive Macrograins Bulk Density Apparatus
LABULK 321 Abrasive Macrograins Bulk Density Apparatus
ABRASIVE MACROGRAINS BULK DENSITY APPARATUS
LABULK 321 Abrasive Macrograins Bulk Density Apparatus is used to measure the bulk density of abrasive grains-macrograins.
LABULK 321 Abrasive Macrograins Bulk Density Apparatus (P/N 32198)
labulk-321-abrasive-macrograins-bulk-density-apparatus
PRINCIPLE
Bulk density of abrasive macrograins is determined by mass of a given volume of the abrasive grains, expressed in grams per cubic centimeter(g/cm³).
Fill a 250 mL beaker to the top with the abrasive grain to be tested. With the funnel outlet closed and the measuring cylinder centered under the outlet of the funnel, pour the grain into the funnel. Open the outlet of the funnel and allow the grain to fall freely until the funnel is empty. Avoid vibrations throughout this procedure. Strike off the excess grain from the measuring
cylinder using a straightedge, making four movements perpendicular to each other. This operation prevents compaction of the abrasive grain in the cylinder. Avoid vibrations or other shocks. Weigh the grains contained in the measuring cylinder.
APPARATUS
-Stand
-Funnel
-Blocker
-Measuring cylinder
Related Products
-
LABULK 304 Universal Bulk Density Tester
-
LABULK 305 Plastic Materials Bulk Density Apparatus
-
LABULK 312 Arnold Density Meter
-
LABULK 321 Abrasive Macrograins Bulk Density Apparatus
-
LABULK 0335 Intelligent Tap Density Tester
-
HMKFlow 315 Metallic Powders Gustavsson Flow Meter
-
LABULK 325 Activated Carbon Apparent Density Tester
-
LABULK 332 Microgrits Abrasive Bulk Density Tester
Leave a Reply
- Links:
Need quote on 2 each of LABULK 321 Abrasive Macrograins Bulk Density Apparatus and LABULK 330 Abrasive Microgrits Bulk Density Apparatus
Good Afternoon
Can I ask for offer for LABULK 321 Abrasive Macrograins Bulk Density Apparatus for Saint Gobain Abrasives, Norton 1 Street, 62-600 Koło, Poland?
Best regards
Kamil Jasiak
Hello
I need price and details of Bulk Density Apparatus
Specification:
In accordance with ASTM D1895 03 Standard Test Methods for Apparent Density
Instrument size conforms to the D-1895 standard in ASTM A method
The upper opening diameter of the funnel is 9.3cm
The lower outlet diameter of the funnel is 0.95±0.08cm
Funnel height is 3.99cm
The height between the cup mouth and the lower outlet of the funnel is 3.8cm
Accessories: stopwatch 1, brush 1, steel rule 15cm 1
Funnel (diameter of aperture 2.5mm,5mm)
2.5mm aperture for measuring flowability,5.0mm aperture for measuring bulk density.
Holder, base and receiver
Chronograph:0.01s
Measuring cup
25ml stainless steel(brass)measuring cup.
V shaped funnel
Measuring cup 100cm3
Stand with funnel shut off
Net Weight (kg) 4
Width (cm) 18
Depth (cm) 23
BUENAS TARDES , DESEO COTIZACION DEL PRODUCTO LABULK 321 Abrasive Macrograins Bulk Density Apparatus
I would like the apparatus for Standard 44-2:2006(en)
Please contact me via email with a quote.
Thanks,
Dan
Hello,
I’m interested at Labulk-0321 Abrasive Macrograins Bulk Density Apparatus. I would like to order that tool/device. Please advice how to proceed to place the order.
Thanks!
[…] Labulk-0321 Abrasive Macrograins Bulk Density Apparatus […]